DIY Solar Panels For Home Usage
DIY Solar Panels
DIY solar panels are a great idea, a great way to save money, and a
great way to save the environment. But it is a hard task to
accomplish without the right guidance, and proper information. So
make sure you research and invest in information before you make
critical mistakes!
The first step you should take is to figure out what type of solar
cells to use. The most common types are mono-crystalline,
polycrystalline and amorphous cells. The cheapest type of cell is
amorphous cells, but they are also less efficient, so I wouldn't
bother with them.
I would stick to mono-crystalline, or polycrystalline cells.
Mono-crystalline are slightly more efficient than polycrystalline
cells but they are very close, as they both use a common element.
Silicon is used in both of those types of cells, and only the
highest grade to be of any use. When you purchase your solar cells,
order an abundance of cells, as they are easily broken, and you get
a discount for the more you purchase in most cases.
Once you have gathered all of your materials, and are ready to start
building, make sure you have a plan of what you want to do. For
example if you plan to build a solar panel with 36 cells, you may
want to have it 4x9 or 3x12. You have to decide whether you want to
wire the panels in series or parallel to end up with the right
amount of voltage and amps. Have this all planned out before you
start, as you can easily make mistakes if you don't!
Another thing to remember while planning out all of your layouts and
dimensions is where you plan to put the solar panel. This is truly a
DIY solar panel, so you have to figure out where the best are to put
your panel so that it gets at least 6 hours of good sunlight! Using
a solar pathfinder can be quite helpful in this step!
You can cut out the pieces for your frame and substrate once you
have the layout of cells determined, that way you can wire the cells
together, and directly place them only the substrate. It will speed
the process up quite a bit. If you have everything ready to go, once
you finish the wiring it will go a lot more smoothly to apply the
frame, and then the cover and caulk to seal it all up! Hooking it up
to the charge converter and battery is quite easy so it is smooth
sailing from there.
For more information about you can build your own solar panel visit
http://www.howtobuildsolarpanelinfo.com . And pick up your
newsletter for more tips and secrets delivered straight to your
email!